Product Description

Basic parameters of 3.2kw Water cooled Spindle:

• Size: 100x250mm (Middle body diameter:100mm;Length:250mm)
• Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.
• Cooling: Water cooling
• Power Interface: Optional H20-4 pins waterproof air plug. The air plug marked 1 ,2, 3, 4, 1 ,2 ,3 were connected to inverter (U, V, W), 4 connected inverter ground.
• Power: 3.0kw
• Voltage: 220v
• Current: 15A
• Frequency: 0-400Hz
• Speed: 0-24000rpm
• Runout Off: Less than 0.01mm
• Diameter(mm): 100
• Bearing Type: 2 x 7005 P4 DT & 2 x 7003 P4 DT
• 4pcs fully sealed angular contact bearings
• Collet: ER20
• Clip Knifediameter: 13mm,12mm,12.7mm,11mm,10mm,9mm,8mm,7mm, 6.35mm,6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm (standard 6mm)
• Water Cooling ER20 collet chunk

Main Application:

Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,bamboo,duotone board(ABS)and etc nonmetal,also can engrave on gold,silver,copper,aluminium,Pb etc soft metal surface working.